| |
K-705 and K-704 Twisted Pair Transmission
System consists of the K-705 high performance
Composite Video to Twisted Pair Transmitter and the K-704
companion Receiving Unit, which converts the Twisted Pair format back
to Composite Video. Transmission via Twisted Pair cable carries video
signals farther than conventional coax cable and is lighter and significantly
less expensive. A simple system consists of a K-705 located
at the video source, and a K-704 located at the remote
display device. For systems with multiple monitors, the K-704
Receiver has a Loop/Termination switch allowing several K-704
receivers to be placed on the same Twisted Pair cable driven by a single
K-705 . Even at a cable length of 400 meters, the frequency
response is well over 6 MHz and at shorter distances, they provide close
to broadcast level performance. Recessed gain and equalization controls
are provided to optimize signal levels. A 12V power supply is provided
with each unit. The K-705 and K-704
are part of the Kramer Tools family of compact, high quality, and cost
effective solutions for a variety of applications.
|
|